Xigmatek PSU 500W Silent NRP-VC503
[CPH-0500Q-X01]
Каталожен №: ++751 Производител: Xigmatek

€45 97 / 89 90 лв.

на склад: не
Продуктът не е наличен
45.97 EUR

Характеристики:

With EMI filter and safety certificates, Xigmatek launched the most suitable budget power supply for common users. Xigmatek VC series power supply describes "Valued-Class" and offers the stable DC output and full electric protection with ideal cost/performance rate. VC series supports latest dual and quad cores CPU and mid-end graphic cards for home entertainment and gaming.

Overview

The ideal cost/performance power supply for budget user to enjoy home entertainment and gaming.

Stable DC output and full protection function as OCP, OVP, UVP, OLP, and SCP.

Low noise level with smart fan speed control by temperature.

Features

Compliant with ATX12V Ver2.2 standard.

Black coating chassis.

Upper 12cm cooling fan.

Smart fan speed control by thermal.

Molex connector with easy-swap design.

SATA and PCI-Express connectors available.

20+4pin cable with mesh.

Full protection by OCP, OVP, UVP, SCP, and OLP.

CE, TUV, UL certified.

12cm Cooling Fan

Thermal Sensor

EMI Filter

PCI-E Connector

Patented Easy Swap

Specification

Product Name	NRP-VC503
Product Number	CPH-0500Q-X01
Power	500W
Dimension	150mm(L) x 150mm(W) x 86mm(H)
Switches	ATX Logic on-off additional power rocker switch
Power Factor	PF > 0.75
Cooling System	120mm Fan, Max. 2000RPM±10%
Hold-up Time	16 ms
INPUT
Input Voltage	115/230VAC (None-PFC), 230V (Passive-PFC)
Input Frequency Range	47/63Hz
MTBF	100,000 hrs minimum (at 25℃)
Input Current	115Vac/10A max. 230Vac/5A max.
OUTPUT
	Max/Min	Regulation	Ripple & Noise	Output
+5V	16.0A/0.3A	+5, -5%	50mV	130W
+3.3V	22.0A/0.5A	+5, -5%	50mV
+12V1	15.0A/1.0A	+5, -5%	120mV	180W
+12V2	16.0A/1.0A	+5, -5%	120mV	192W
-12V	0.8A/0.0A	+10, -10%	120mV	9.6W
+5Vsb	2.5A/0.0A	+5, -5%	50mV	12.5W
Total Power	500W
Environment
Operating Temp.	5℃ to 40℃
Storage Temp.	-20℃ to 70℃
Operating Humidity	5% to 85%, non-condensing
Storage Humidity	5% to 95%, non-condensing
Protection
	DC Rail		Trigger Point/Range
Over Voltage Protection	Trippunkt +3.3V trip point		4.5V max.
	Trippunkt +5.0V trip point		7.0V max.
	Trippunkt +12.0V trip point		15.6V max.
Over Current Protection	The power supply should provide OCP and should shutdown before 240VA of each output power (included +5V, +3.3V). The power supply should provide OCP when over current output of each output power (included +12V).
Short Protection	All output to GND