Xigmatek Case MIDGARD
[CPC-T55DB-U01]
Каталожен №: ++740 Производител: Xigmatek

126 00 лв. / €64 43

Изпращайте ми известия

на склад: не
Продуктът не е наличен
126.00 BGN

Характеристики:

XIGMATEK PURE BLACK EDITION
ON CLASSIC CHASSIS

„Midgard” - home of mankind and protected by Thor, God of thunder, and his hammer. Signalizing the strength of diviness and mercy, but at the same time proprietaring the hardware you built in. Combined design and features such as black coated SECC and steel mesh are spotlighting your chassis when your system is built. Furthermore this chassis is supplied with 2 x 120mm pre installed fans (orange blade and black, transparent housings), but another 5 fans can be mounted in different areas for best possible airflow. 5 x 5.25" bays will be able to house all your optical drives, but also 5 trays for your 3.5" and 2.5" HDDs are available so you can feel free by "DIY". Tool free design and a "gorgeous" outlook are only a few points why this chassis is a "must" not only for enthusiast but also for pc beginners

Overview

Classic chassis exterior contains pure black coating interior even with each screw. It is more elegant and fancy design than any other mid-tower chassis with ATX and Micro-ATX form factors.

Midgard was designed by gaming and cooling thinking within tool-free hard drives and add-on card installation, easy installation CPU cooler back plate window, four pipe holes for water cooling system and seven cooling fan space at most.

0.7mm SECC chassis body, both side 5.25" tool-less holders, anti-vibration rubber on PSU space, and HDD tray with rubber screw holes are all the user-friendly and system-stable concepts.

Features

Screw-less tooling for 5.25" bay installation.

Screw-less tooling for expansion slot installation.

Screw-less tooling for 3.5" bay installation.

Preinstalled 120mm front and rear fans with white LED.

Seven cooling fans are available.

RPM speed control knob for three fans.

Back window for easy CPU cooler back plate.

Support water cooling system.

Diamond cut surface aluminum I/O and reset buttons.

Bottom PSU location for face-up and down installation.

Anti-vibration rubber for PSU.

Dust filter for intake airflow.

Specification

Product Name	MIDGARD
Product Number	CPC-T55DB-U01
Dimension	Main Unit: 206 x 510 x 477 mm / 8.1 x 20.1 x 18.8 inches Box: 258 x 560 x 583 mm / 10.1 x 22.0 x 23.0 inches
Drive Bay	5.25" External x 5 (One bay with 5.25" to 3.5" adapter, tool-free) 3.5" Internal x 5 (Tool-free)
Expansion Slot	7 slots (tool-free) Available for max. 295mm length VGA card
Motherboard Support	ATX, Micro ATX (with easy back plant installation window)
Power Supply	Standard P/S2 ATX/EPS power supply unit 1. Intake airflow hole with dust filter. 2. Available for face upward and downward installation. 3. Within anti-vibration rubber.
Cooling System	Water pipe holes x 4 (with rubber cover)
	Front Fan: 120mm white LED with orange blades x 1 (Preinstalled) (80/90/140mm fan is available)
	Rear Fan: 120mm white LED with orange blades x 1 (Preinstalled) (80/90 fan is available)
	Side Fan: 80/90/120/140mm fan x 1 (optional) 120/140mm fan x 1 (optional)
	Bottom Fan: 120/140mm fan x 1 (optional)
	Top Fan: 120/140mm fan x 2(optional)
	Fan Speed Control: Three fan speeds are adjustable synchronously by one knob on back bracket.
I/O Panel	Top Panel: Power On/Off switch and reset button Front Panel: USB2.0 x 2, e-SATA x 1, Audio out x 1, Microphone x 1