| ♠ |
High efficiency over 85% Higher efficiency, lower energy loss, cooler our Earth. | 
| ♠ |
Compliant with ATX12V Ver.2.3 Compliant with latest Intel ATX12V Ver.2.3 PSU design guide. | 
| ♠ |
0.99 Active PFC rate The highest AC utility rate and active switch for universal AC voltage. | 
| ♠ |
Real and stable 700W output Continuous 700W total DC output for real 100% loading. | 
| ♠ |
DC quality with low ripple noise Low ripple noise DC output for better devices performance. | 
| ♠ |
Japanese 105°C Main Capacitor High-end and more stable Japanese capacitor for better output performance. | 
| ♠ |
140mm silent cooling fan The bigger fan is equal to lower RPM and less noise. | 
| ♠ |
Smart thermal fan control Fan RPM was controlled by temperature and keep silence in typical loading. | 
| ♠ |
All DC cables with mesh sleeve Reduce airflow resistance for better thermal release in PC case. | 
| ♠ |
PCIe graphic card connector support Support high-end graphic card with PCIe 6/8pin connector. | 
|
|
|
|
| 14cm Cooling Fan |
|
|
|
|
| Smart & Silent Fan Control |
|
|
|
|
|
| PCI-E Connector |
|
|
|
|
| Patented Easy Swap |
|
|
|
|
|
| 4+4Pin Connector |
|
|
|
|
|
| Japanese Main Capacitor |
|
|
|
|
|
| Mesh Sleeves | |

Specification
| |
|
Product Name |
NRP-PC702 |
|
Product Number |
CPH-0700U-X02 |
|
Power |
700W |
|
Dimension |
150mm(L) x 160mm(W) x 86mm(H) |
|
Power Factor |
PF > 0.9 |
|
Cooling System |
14cm fan, Max. 1800RPM±10% |
|
Hold-up Time |
16 ms |
|
Noise Level |
16dBA±10% at 800RPM |
|
INPUT |
|
Input Voltage |
100-240VAC |
|
Input Frequency Range |
47/63Hz |
|
MTBF |
100,000 hrs minimum (at 25℃) |
|
Input Current |
115Vac/10A max. 230Vac/5A max. |
|
OUTPUT |
| |
Max/Min |
Regulation |
Ripple & Noise |
Output |
|
+5V |
20.0A/0.2A |
+5, -5% |
50mV |
150W |
|
+3.3V |
24.0A/0.5A |
+5, -5% |
50mV |
|
+12V1 |
30.0A/0.5A |
+5, -5% |
120mV |
648W |
|
+12V2 |
30.0A/1.0A |
+5, -5% |
120mV |
|
-12V |
0.3A/0.0A |
+10, -10% |
120mV |
3.6W |
|
+5Vsb |
2.5A/0.0A |
+5, -5% |
50mV |
12.5W |
|
Total Power |
700W |
|
Environment |
|
Operating Temp. |
10℃ to 40℃ |
|
Storage Temp. |
-40℃ to 70℃ |
|
Operating Humidity |
20% to 90%, non-condensing |
|
Storage Humidity |
5% to 95%, non-condensing |
|
Protection |
| |
DC Rail |
Trigger Point/Range |
|
Over Voltage Protection |
Trippunkt +3,3 V |
4.5 V max. |
| Trippunkt +5,0 V |
7.0 V max. |
| Trippunkt +12,0 V |
15.6 V max. |
|
Over Current Protection |
The power supply should provide OCP and should shutdown before 240VA of each output power (included +5V, +3.3V). The power supply should provide OCP when over current output. of each output power(included +12V). |
|
Short Protection |
All output to GND | | |