- Single 120mm low noise fan
- Dual 12V outputs, for stability and safety
- True Spec noise level of 21.3 dBA measured at an independent lab using ISO 7779 standard
- ATX12V 2.01 compliant. 24-pin main power connector with detachable 4-pin section
- 4 Serial ATA connectors
- PCI Express graphic card power connectors
- Dedicated output for more stability and less ripple noise
- Feedback circuits for tighter load regulation (±3%) to maintain accurate voltage to all components
- Industrial-grade protection circuitry prevents damage resulting from short circuits, power overloads, excessive current, excessive voltage , excessive temperatures
- Fan Only power connectors allow True Power to control case fan speeds, reducing total system noise
- MTBF: 80,000 hours
- Dimensions: 5.9" (W) x 3.4" (H) x 5.5"(D)
- Safety approval: CB, CE, DEMKO, FCC Class B, FIMKO, EMKO, UL, VDE, TUV
- Active Power Factor Correction (PFC) (Europe only)
- Power Factor value greater than 90% (Europe only)
- Gold plated connectors for superior conductivity
- Important Note: The TruePower 2.0 Fan Only connectors are designed to power standard fans only. Attaching thermally-controlled fans to these connectors will likely result in unpredictable and undesired behavior. Thermally-controlled fans should only be connected to the standard 4-pin Peripheral Power Connectors. Please do not connect more than three fans to the Fan Only connectors.
|
FEATURES |
| Maximum Power |
480 Watts |
| Switches |
ATX Logic on-off
additional power rocker switch
115/230 Volt selector switch |
| Special Connectors |
ATX12V
3-pin Fan Sensor
Fan Only
SATA |
| Transient Response |
+5V, +12V and 3.3V outputs return to within 3% in less than 1ms for 20% load change. |
| P. G. Signal |
100-500ms |
Over Voltage Protection
recycle AC to reset |
+5V trip point < +6.5V
+3.3V trip point < +4.1V
+12V trip point < +14.4V |
| Leakage Current |
< 3.5mA @ 115VAC | |
|
DIMENSIONS |
| Unit Size |
5.9" (W) x 3.4" (H) x 5.5" (D)
14.9cm (W) x 8.5cm (H) x 14cm (D) |
| Net Weight |
5lbs.; 2.3kg | |
| INPUT |
| Input Voltage |
115 VAC / 230VAC |
| Input Frequency Range |
47Hz to 63Hz |
| Input Surge Current |
< 60A @ 115VAC |
| Input Current |
12.0A for 115VAC
6 .0A for 230VAC |
| Hold-up Time |
> 17ms at Full Load |
| Efficiency |
> 70% |
| EMI/RFI |
FCC Class B
CISPR22 Class | |
| OUTPUT |
| |
+3.3V |
+5V |
+12V1 |
+12V2 |
+5V SB |
-12V |
| Max. Load |
30.0A* |
38A* |
18A* |
18A |
2.0A |
1.0A |
| Min. Load |
0.5A |
0.5A |
0.4A |
0.4A |
0A |
0A |
| Load Reg. |
±3% |
±3% |
±3% |
3% |
±5% |
±5% |
| Ripple V(p-p) |
50mV |
50mV |
120mV |
120mV |
50mV |
120mV |
| * +5V, +3.3V, +12V1, 12V2 maximum output 460 Watts max. | |
| ENVIRONMENTAL |
| Operating Temp. |
0 to 50℃ |
| Operating Alt. |
Sea Level 10,000 ft. |
| Non-Operating Vibration |
Operating: 10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis
Non-operating: 10-300 Hz, 2.0G, 3 axes, 1 hr. ea. axis |
| MTBF |
80,000 hrs. @ 25℃ |
| Approvals |
UL, CUL, FCC Class B, CB, TÜV | | |
Click to enlarge
